The Ghost Immobiliser
Immobilisers are a powerful weapon in the fight against vehicle theft. They prevent the vehicle from starting if the isn't equipped with an identification card. ghost immobiliser review help to stop hotwiring or traditional forms of vehicle theft. However, more modern methods such as key cloning and relay theft are becoming more common.
To combat these latest trends, the ghost immobiliser works to make your car completely inaccessible. It is quiet and discreet and does not rely on key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser, a revolutionary device, connects with the CAN data network of your vehicle to stop key cloning and theft. It is an TASSA approved product and has been recognized by insurance companies. It operates silently and is virtually undetectable to thieves. It makes use of buttons on your steering wheel, centre console, and door panels to create an individual pin code that must be entered before you can start your car. You can create up to 20 different sequences to increase security. The system is simple to set up and does not require any additional wiring or hardware.
To ensure the best possible results It is recommended that you select a reputable CAN immobiliser installer who specializes in your particular vehicle. It is ideal if they have a workshop in your local area to enable you to visit and have the installation completed. You can also find a range of tools and materials that can aid you in the installation. These include basic hand tools, a multimeter and insulation tape, as well as heat shrink tubing to safeguard the connections. A user's manual will give you the necessary instructions on how to wire your vehicle.
Before beginning the installation Before beginning the installation, disconnect the battery to avoid short circuits and airbag deployment. It is important to double-check the location of the CAN H and L wires, as incorrect identification could lead to an inefficient system integration. It is also a good idea to mark the wires using small bits of tape or mark them. Utilize a multimeter to verify that the power source is providing the same 12V.
Advanced thieves may employ various methods to evade Ghost Immobilisers, such as jamming or spoofing. These techniques involve amplifying signals from the key fob to your vehicle's electronic controller unit. However, with the latest anti-jamming technologies and a constant monitoring you can shield your vehicle from these sophisticated attacks.
Increased security
Ghost immobilisers provide an additional layer of protection to protect your vehicle from theft. It has a PIN protection system that is entered by pressing buttons on the dashboard or steering wheel which makes it more difficult for thieves to steal your vehicle. The device is also designed to be hidden within your vehicle, with no any other lights or signals that would alert a potential thief to its presence. It communicates with your car's ECU via the data bus, which means it isn't vulnerable to the same hacking or relay attacks that can cripple conventional security systems.
It's a fantastic investment for those who have prestige cars that are at a higher risk of theft due to their price and the popularity of their vehicles. Its advanced features shield your vehicle from key cloning and ECU swapping. Some ghost immobilisers are paired with apps, so you can arm or disarm easily. They may also have a service/valet setting that lets you temporarily disable the immobiliser during repairs or service.
Another great feature of a ghost immobiliser is that it does not require any wire cutting. This is an excellent feature, especially if your vehicle is newer and doesn't come with an immobiliser. Some systems can also integrate with GPS tracking devices, adding an extra layer of security to your vehicle. The use of a GPS tracker may also help you reduce the cost of insurance. If you decide to purchase a ghost immobiliser ensure that it is TASSA verified and a professional installer installs it for you.
Compatible with all major brands and models
The Ghost Immobiliser was designed to work with all major car models and makes, protecting your pride and joy from theft. It uses buttons in your steering wheel, centre console, or door panels to generate an individual pin code which you must enter before you can drive your vehicle. The system is tamper proof and undetectable, and is backed by a three-year warranty. It is also fully endorsed by insurance providers This means that it can help to lower your premiums.
The Ghost system differs from the standard immobilisers that use the key fob to provide ignition control. It is connected directly to the engine controller via the CAN bus. This means it's secure from tampering, is nearly impossible to remove or disable and is not hacked by organised car thief criminal gangs. In addition to this, Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. Ghost system can be paired with an secure iPhone application that allows remote management and monitoring.
You can create an PIN code that is easy to remember, yet mathematically difficult for thieves to guess. You can customize and change the PIN at any time to keep your vehicle secure, even if it is located in a parking lot or on the street. You can also set a service or valet mode in case you need someone other than you to drive your vehicle for a short period, for example when you're in the garage for servicing. This feature can also help keep your car from being stolen by a dishonest mechanic. You can select an Ghost Call alert to give you extra peace of mind. It will notify you when your car is moving or has been moved.
Convenience
The ghost immobiliser shields your vehicle from common theft methods such as key relay or cloning. It is activated by connecting to the car's CAN network and blocking communication with the engine ECU. This makes it hard for thieves to hack or clone your vehicle.
Once the system is installed, you'll need to enter a PIN number up to 20 digits long using the buttons on your dashboard or steering wheel to start the engine. The system is completely hidden and undetectable to thieves, as it does not emit any radio frequency signals. It can be set up using an PIN code that can be altered by the user, which adds to its security. The system is designed to stop circuit-cutting, making it almost impossible to alter.
Certain systems let you communicate directly with the immobiliser via an app on your phone to disarm it immediately when you forget your PIN. Some systems even have a service/valet setting that allows you to start your car, for instance, when you drop it off at Valet Park or a garage.
The Ghost Immobiliser is also undetectable to thieves as it doesn't transmit radio signals, which is a significant advantage over other aftermarket vehicle security systems. Additionally, it is easy to use and doesn't require any complex wiring. It can be used in conjunction with dash cams for added safety. This dash cam is Thinkware F70, which features clear and crisp HD 1080p dashcam footage and Format Free Technology and parking mode. The system can be wired to ensure the highest performance and durability.
Installation
If you want to protect your vehicle from theft, it's important to choose the correct immobiliser ghost. This device will prevent car thefts by preventing the communication between key fobs as well as the engine controller unit. This prevents thieves from intercepting the signal and cloning your key fob in order to start your car. It can also detect the moment it has been altered with and notify the owner of the vehicle.
The device is simple to install and integrates with the existing systems in your vehicle. It does not require any modification to the wiring in your vehicle and can be concealed in a secluded area, like under the dashboard. To ensure that the device is properly installed, follow instructions in the user manual. After installation, it's important to test the system. This will confirm that the immobiliser ghost works as intended.
You can purchase an Autowatch Ghost 2 immobiliser from a certified installer and have it installed in your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it difficult for thieves to steal the system or bypass it. The installation process generally takes between 2 and 3 hours.
During the process of installation, it is recommended to review the wiring diagram of the vehicle model you are using. This will enable you to locate the CAN High and CAN Low wires required to connect your Ghost to the engine of your vehicle. It is also essential to double-check the connections to ensure that they are secure and properly insulated.
Once the installation is complete after which you can use the Ghost Immobiliser during normal operation. It will shut off the ignition of your vehicle if it is not started with the correct PIN code which you can set yourself. The ghost of the immobiliser can be set to Service/Valet Mode if you need your vehicle to be serviced or valet-parked.